Accessories

MIXING NOZZLES

All Versi-Foam® Systems (other than System I) include ten mixing nozzles. These nozzles snap onto the front of the gun, and is the only place in the system where the two chemicals are mixed together creating foam. It is for this reason that the nozzle must be changed every time dispensing has been stopped for longer than the tack free time. The majority of our systems have a tack free time of 30 to 45 seconds. If your application require numerous starting/stopping procedures, where the time between applications is greater than the tack free time, then it may be necessary to purchase extra mixing nozzles. The multi- purpose nozzle, extending mixing nozzle and flash spray nozzles are available for purchase in any quantity.

SPRAY FOAM GUN/HOSE ASSEMBLIES

All Versi-Foam® Systems (other than System I) include a spray foam gun/hose assembly, a packet containing ten mixing nozzles, three fan tips, and nitrile gloves. In the event that the kit was not functioning properly due to a prolonged duration of time between uses or extreme humidity causing a clog on the "A" component side of the gun; replacement gun and hose assemblies are available for purchase.

All medium size kits use the 10-foot gun/hose assembly complete with a packet of ten mixing nozzles, three fan tips, and nitrile gloves.

All large size kits (with the exception of the Hy-Flo) use the 15-foot gun/hose assembly complete with a packet of ten mixing nozzles and three fan tips. The Hy-Flo System uses a 20-foot gun/hose assembly complete with a packet of 12 flash spray nozzles, three multi-purpose mixing nozzles, and nitrile gloves.

For those further and harder to reach areas a 30-foot gun/hose assembly is available and can ONLY be used with the large size kits.

FAN TIPS

All Versi-Foam® Systems (other than Systems I and Hy-Flo Systems) include three fan tips. This is an accessory that is screwed onto the threaded end of the mixing nozzle to produce a fan spray pattern. The pattern is approximately 14" wide when you are standing 18" to 24" from the surface. This accessory will work with all foam formulas.

Want the full Versi-Foam Product List?

Sign Up For Our Newsletter

TOP