VersiFoam® provides a wide variety of spray foam insulation kits to ensure that we have what you need for all of your commercial, residential, construction, and industrial insulation needs.
How do you know which spray foam insulation kit is right for your next project? In this blog, we’ll walk you through the three categories in our collection: closed cell spray foam, slow rise spray foam, and high density spray foam. We’ll also break down the specific kits we offer in each category. We want this to be your go-to resource when researching your spray foam insulation kit purchases.
Closed Cell Spray Foam Insulation
Closed cell spray foam is a thick, dense spray foam with a completely closed cell structure. You can learn more about the formula and how it compares to open cell spray foam insulation in this blog. Closed cell foam has a high thermal and vapor resistance, which makes it ideal for damp environments.
At VersiFoam®, we offer a 2 lb closed cell spray foam insulation kit. They are available in two different formulations: Standard Formula and Class I Formula.
The Standard Formula provides an R-value of 6.4 at a one-inch thickness. We recommend the Standard Formula for most commercial and industrial applications. It’s great for a vast array of uses, such as air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck or trailer insulation, sculpting and molding, and pool and spa insulation.
Class I is our flame retardant insulation. Classified as Class I in accordance with ASTM E-84, this flame-retardant kit will limit the flame spread and smoke development if exposed to a fire. This formula provides an R-value 6.5 at a one inch thickness. We recommend Class I for inhabitable buildings or anywhere else flammability might be a concern.
We offer four different all-in-one spray foam closed cell insulation kits, based on the size of your project:
- System 1
- Produces 12 square feet of cured foam at 1″ thickness, or one cubic foot
- System 9
- Produces 108 square feet of cured foam at a 1″ thickness, or 9 cubic feet
- System 15
- Produces 198 square feet of cured foam at a 1″ thickness, or 16.5 cubic feet
- System 50
- Produces 600 square feet of cured foam at a 1″ thickness, or 50 cubic feet
To get all the info on our closed cell spray foam insulation kits, check out the spec sheet and safety sheet.
Slow Rise Spray Foam Insulation
Slow rise spray foam is known for its slow reactivity. It’s best suited for use in areas where the foam needs to flow to distant areas before it solidifies. VersiFoam® slow rise spray foam insulation kits are available in a 2 pound per cubic foot density. Whereas most of our foams are tack-free in approximately 30 to 45 seconds, the Slow Rise formula is tack-free in approximately 2 minutes, providing that necessary extra time for the foam to flow, expand, and then set.
A word of caution – because our slow rise formula expands to about six times original volume, we do not recommend you use this in a wall cavity if any of the walls are made of gypsum wallboard or other material that cannot withstand this expansion pressure.
Our slow rise spray foam insulation kits all have an R-value of 6.5 and are made with our Class I flame retardant formula. We offer our slow rise spray foam insulation kits in a range of sizes to best suit your various needs:
- System 9 Slow Rise
- Produces 108 square feet of cured foam at a 1″ thickness, or 9 cubic feet
- System 15 Slow Rise
- Produces 200 square feet of cured foam at a 1″ thickness, or 16.5 cubic feet
- System 50 Slow Rise
- Produces 600 square feet of cured foam at a 1″ thickness, or 50 cubic feet
To get all the info on our slow rise spray foam insulation kits, check out the spec sheet and safety sheet.
High Density Spray Foam Insulation
If you’re looking for a harder formula, our high density spray foam insulation kits are the solution. This formulation has a free rise density of 2.8 pounds per cubic foot (3 pounds per cubic foot in place). It is 98% closed cell, giving it an R-factor of 5.9, a low moisture absorption rate, and excellent compressive strength. This formulation has an expansion rate six times its original liquid volume and is tack free in approximately 30-45 seconds.
Due to its high absorption and compression, we recommend using the VersiFoam® high density spray foam insulation kits in more rugged environments that require a harder insulation, like cryogenics or polyurethane foam roofing repair.
We offer our high density spray foam formulation in two different kits:
- System 10
- Produces 120 square feet of cured foam at a 1″ thickness, or 10 cubic feet
- System 33
- Produces 396 square feet of cured foam at a 1″ thickness, or 33 cubic feet
To get all the info on our slow high density foam insulation kits, check out the spec sheet and safety sheet.
Find a VersiFoam® Dealer Near You
VersiFoam® has been innovating the spray foam insulation industry for over 40 years – ever since the introduction of our patented U-Control spray gun that allows you to regulate the quantity of foam being dispensed at a rate so controlled, you can write your name with it. We offer a wide range of all-in-one spray foam kits that deliver professional results in an easy-to-use package.
Learn more about our spray foam systems and find a VersiFoam® dealer near you to place your order today.
