VERSI-TITE 24 OZ. Cans For Use With Dispensing Gun

VERSI-TITE is a one component polyurethane foam used to seal small gaps and crevices. It dispenses from the can in a 3/8" caulking bead for easy use in sealing around doors, windows, pipes, outlets or any other penetrations. It's minimal expansion of two times its original volume allows for usage around window and door frames without distortion. The foam is considered flame retardant, with an ASTM-E84 Flame spread rating of 10 and a smoke developed rating of 20. It has a UL listing, number R-20556. It is suitable for use in any type of structure.

VERSI-TITE is a moisture cured product, and draws humidity from the air for cure. At approximately 50% relative humidity, the foam is tack free to the touch in approximately 15 minutes. It is fully cured in 24 hours.

VERSI-TITE is available for contractor use in a 24 oz. can that can be attached to a dispensing gun. The trigger dispensing allows for more control over chemical flow and bead size. One 24 oz. can will yield approximately 1920 linear feet of a 3/8" caulking bead.

Dispensing guns are available in all metal construction and an inexpensive plastic model. Cleaning solvent to flush the guns clean at the end of the day is available in a 12 oz. pressurized can. At the end of the day, you unscrew the foam can, screw on the gun cleaner, pull the trigger to flush out the gun, and put the foam can back on.