VERSI-FOAM® High Density Foam Systems

High Density Spray Foam Systems, Polyurethane Foam Roofing Repair

VERSI-FOAM® is available in a higher density system, with a free rise density of 2.8 pounds per cubic foot, 3 pounds per cubic foot in place. It is 98% closed cell resulting in an R-factor of 7.7 per inch, a low moisture absorption rate and excellent compressive strength. This spray foam formula is suitable for applications where a stronger, harder material is required, including cryogenics and polyurethane foam roofing repair.

The high density system is available in two sizes. The VERSI-FOAM® System 10 is packaged in one carton, and includes the two chemical components, the patented U-CONTROL dispensing gun attached to two 10 foot hoses, ten mixing nozzles, and three fan tips. It weighs 42 pounds. In theoretical coverage, the System 10 will yield 120 square feet at a 1" thickness, or 10 cubic feet.

The VERSI-FOAM® System 33 is packaged in two cartons, each weighing approximately 60 pounds. It includes the two chemical components, the patented U-CONTROL dispensing gun attached to two 15 foot hoses, ten mixing nozzles, and three fan tips. It will cover approximately 396 square feet at 1" thick or 33 cubic feet.

The VERSI-FOAM® System 10 and System 33 can be shut down and used again on another day, however we strongly recommend that it is used at least once per week.

• Operators Manual
• System 10 Video (WMV - Flash)
• System 33 Video (WMV - Flash)

MSDS

Don't know how much foam you will need?
Use our handy online estimimator.