Spray Foam Insulation System 15 and 50

Spray Foam Insulation System 15 and System 50

The Foam Insulation System 15 and System 50 are the medium and large size foam insulation kits in the standard, non-rated foam formula. The density of the foam is 1.75 pounds per cubic foot free rise or 2 pounds per cubic foot in place. The foam insulation will expand six times its original volume and is tack free in 30 to 45 seconds. The foam insulation is 97% closed cell, has an insulation R-value of 7.7 per inch and is recommended for most commercial and industrial applications, including insulating, air sealing, condensation control, sound deadening, structural enhancement, tank and pipe insulation, roof repair, marine flotation and gas tank encapsulation, truck and trailer insulation, sculpting and molding medium, pool and spa insulation, and many more.

The System 15 is packaged in one carton weighing 41 pounds, and includes the two chemical components, our patented U-CONTROL dispensing gun attached to two 10 foot hoses, ten mixing nozzles, and three fan tips. Theoretically, it will produce 198 square feet of cured foam at a 1" thickness, or 16-1/2 cubic feet.

The System 50 is packaged in two cartons, each weighing approximately 60 pounds, and includes the two chemical components, our patented U-CONTROL dispensing gun attached to two 15 foot hoses, ten mixing nozzles, and three fan tips. Theoretically, it will produce 600 square feet of cured foam at a 1" thickness, or 50 cubic feet.

The System 15 and the System 50 can be shut down and used on another day. However, it is very strongly recommended that the systems are used at least once every seven days.

• Operators Manual
• System 15 Video (WMV - Flash)
• System 50 Video (WMV - Flash)

MSDS

Don't know how much foam you will need?
Use our handy online estimimator.