Versi-Foam®  2 lb closed cell spray foam insulation kits are available in two different formulations: Standard Formula and Class I (flame-retardant) Formula. The Standard Formula provides an R-value of 7.7 at a one inch thickness. Recommended for most commercial and industrial applications, the standard formula is ideal for air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck/trailer insulation, sculpting and molding, pool and spa insulation, and much more. 

The Class I (flame-retardant) Formula provides an R-value 6.7 at a one inch thickness. Classified as Class I in accordance with ASTM E-84, these flame-retardant kits will limit the flame spread and smoke development if exposed to a fire. Class I kits are recommended for use in inhabited buildings, including residential applications or any application in which flammability is a concern. Always consult your local building codes to determine if a flame retardant product is required for your application.

All of our Class I kits are manufactured with an anti-microbial formula that stops mold from growing on the surface of the foam. All Versi-Foam® products are naturally mold resistant, but the added anti-microbial element provides a safeguard against the growth of the five most common types of fungi found in homes.

 

Small Kit: System I

  • Packaged as two aerosol cans in a plastic carriage contained in a fiberboard box. It includes a thumb-roll mechanized dispenser. 
  • Will produce 12 square feet of cured foam at 1" thickness, or one cubic foot 
  • This kit is designed to be used on the same day that it is opened
  • Available in both the Standard and Class I formula

 

Medium Kits: System 9 and System 15

  • Packaged in one carton and include the two chemical components, our patented U-Control dispensing gun attached to two 10 foot hoses, ten mixing nozzles, three fan tips, and nitrile gloves.
  • System 9 will produce 108 square feet of cured foam at a 1" thickness, or 9 cubic feet
  • System 15 will produce 198 square feet of cured foam at a 1" thickness, or 16.5 cubic feet
  • Available in both the Standard and Class I formula

 

Large Kits: System 50

  • Packaged in two cartons and includes the two chemical components, our patented U-Control dispensing gun attached to two 15 foot hoses, ten mixing nozzles, three fan tips, and nitrile gloves.
  • Will produce 600 square feet of cured foam at a 1" thickness, or 50 cubic feet
  • Available in both the Standard and Class I formula
Hy-Flo Systems: 700 and 350
  • Constant pressure systems, ideal where a consistent spray pattern is needed from start to finish
  • Can spray an even 14 1/2" wide pattern at 1" thick. Perfect solution for the highly efficient hybrid insulation system or air sealing projects where 1" of foam is required.
  • Hy-Flo 700 consists of two sets of chemical tanks partially filled and more heavily pressurized. It is packaged in four cartons, complete with our patented U-Control dispensing gun attached to two 20 foot hoses, 12 flash spray nozzles, 3 multi-purpose mixing nozzles, and nitrile gloves.
  • Hy Flo 700 will produce 700 square feet of cured foam at a 1" thickness
  • Hy-Flo 350 is intended for use as a spare set of chemicals for the Hy-Flo
    700. It consists of a single set of chemicals with no accessories.
  • Hy-Flo 350 will produce 350 square feet of cured foam at a 1" thickness
  • The Hy-Flo Systems are a Class I foam

The medium and large size systems can be shut down and used on another day. Once the kit is opened, it is recommended that the kit be used in 30 days, and it is required that the systems are used at least once every seven days. 


The published yields for the Versi-Foam® Systems are theoretical and vary based on several factors, including ambient conditions and specific application.

 

This page has been visited 86,923 times since June 30th, 2010

ApogeeINVENT Dynamic Marketing Website