Versi-Foam® is also available in lower density foam. The Versi-Foam® Systems 28 and 88 have a density of approximately 1 pound per cubic foot. The foam will expand six times its original liquid volume and is tack free in aproximately 30 to 45 seconds. This formulation of foam is 80% closed cell and has an insulation value of 7. This spray foam formula is ideal for air-sealing and void filling for moderate temperature applications These systems should NOT be use in applications where water or moisture is present because of the higher water absorption rate.
System 28
The Versi-Foam® System 28 is the medium size foam kit in the Versi-Foam® product line. The Versi-Foam® System 28 is packaged in one carton weighing 39 pounds and includes the two chemical components, our patented U-Control dispensing gun attached to two 10 foot hoses, ten mixing nozzles, three fan tips and nitrile gloves. The Versi-Foam® System 28 will produce 300 square feet of cured foam at 1" thickness, or 25 cubic feet.
System 88
The Versi-Foam® System 88 is the largest size foam kit in the Versi-Foam® product line. The Versi-Foam® System 88 is packaged in two cartons, each weighing approximately 60 pounds. The system is complete with the two chemical components, our patented U-Control dispensing gun attached to two 15 foot hoses, ten mixing nozzles, three fan tips and nitrile gloves. The Versi-Foam® System 88 will produce 1,000 square feet of cured foam at 1" thickness, or 83 cubic feet.
The medium and large size systems can be shut down and used on another day. However, it is vary strongly recommended that the systems are used at least once every seven days.
The pubished yields for the Versi-Foam® Low Denisty Systems are theoretical and vary based on several factors, including ambient conditions and specific application.
